Wednesday, August 31, 2011

Legacy LA568 2 Channel 800 Watt Bridgeable Mosfet Amplifier

Legacy LA568 2 Channel 800 Watt Bridgeable Mosfet Amplifier Reviews


Other Picture


Legacy LA568 2 Channel 800 Watt Bridgeable Mosfet Amplifier Feature

  • 400 Watts x 2 Output
  • 800 Watts x 1 Bridged Output
  • Variable Hi/Lo Electronic Crossover Network
  • Variable Bass Boost
  • Variable Input Level (Gain) Control
400 Watts x 2 Output800 Watts x 1 idged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost Variable Input Level (Gain) ControlMOSFET PWM Power SupplyPower ON LED Indicator LED Protection Indicator Remote Bass Boost Hi/Lo Impedance Input Thermal / Overload / Short Circuit Protection Anti-Thump Turn-On Dimensions: 1.97-Inch H x 11.42-Inch W x 9.25-Inch L


Visit Store Now !!

Detail Products

Detail Reviews




Aug 31, 2011 23:02:04

Tuesday, August 30, 2011

Lanzar VIBE246 Viberant 2 Channel 1200 Watts High Power Mosfet Amplifier

Lanzar VIBE246 Viberant 2 Channel 1200 Watts High Power Mosfet Amplifier Reviews


Other Picture


Lanzar VIBE246 Viberant 2 Channel 1200 Watts High Power Mosfet Amplifier Feature

  • 2 x 300W RMS at 4 OHMS 2 x 600W MAX at 4 OHMS
  • 1 x 1200W MAX at 4 OHMS Bridged 2 x 500W at 2 OHMS RMS
  • Electronic Crossover Network
  • Bass Boost Circuit
  • 2 Ohms Stereo Stable
2 x 300W RMS at 4 OHMS 2 x 600W MAX at 4 OHMS 1 x 1200W MAX at 4 OHMS idged 2 x 500W at 2 OHMS RMS Electronic Crossover Network Bass Boost Circuit 2 Ohms Stereo Stable Anti-Thump Turn-On Illuminated Top Panel Soft Turn On/Off High Low Level Inputs Power Protection LED Indicators Advanced Protection Circuitry Remote Control Bass Booster THD: <0.04% S/N Ratio: <90dB Channel Separation: <65dB Freq. Response: 15Hz~35kHz Dimensions: 11.06-InchW x 2.24-InchH x 13.5-InchL


Visit Store Now !!

Detail Products

Detail Reviews




Aug 30, 2011 19:41:14

Monday, August 29, 2011

Cadence Acoustics XaH125.2 500 Watt Peak 2-Channel Class AB Amplifier

Cadence Acoustics XaH125.2 500 Watt Peak 2-Channel Class AB Amplifier Reviews


Other Picture


Cadence Acoustics XaH125.2 500 Watt Peak 2-Channel Class AB Amplifier Feature

  • Cadence XaH125.2 class AB 2-channel amplifier
  • 80W x 2 @ 4 ohm RMS, 125W x 2 @ 2 ohm RMS, 250W @ 4 ohm bridged RMS, 500W Peak Power
  • Frequency Response: 10Hz - 40 kHz
  • Minimum THD: <0.1%, S/N Ratio: >97dB, Damping Factor: >114 @ 100Hz, Channel Separation: >50dB
  • Dimension (L x W x H): 10.4 x 10.5 x 2.6 inches
The Xenith XaH125.2 has a power handling of 80 Watts x 2 at 4 ohm RMS, 125 Watts x 2 at 2 ohm RMS, 250 Watts at 4 ohm Bridged RMS, with a 500 Watt Peak. The frequency response is 10Hz - 40 kHz with a channel separation of >50dB. It has a minimum total harmonic distortion of <0.1%, a signal-to-noise ratio of >97dB, and a damping factor of >114 @ 100Hz. The input voltage is 200mV - 8V and the dimensions of the XaH125.2 are 10.4-inch (L) x 10.5-inch (W) x 2.6-inch (H). Available in both brushed anodized orange or brushed anodized black.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 29, 2011 18:55:23

Saturday, August 27, 2011

MB Quart Marine NAU260 180 Watt A/B Class 2-Channel Amplifier

MB Quart Marine NAU260 180 Watt A/B Class 2-Channel Amplifier Reviews


Other Picture


MB Quart Marine NAU260 180 Watt A/B Class 2-Channel Amplifier Feature

  • 2 x 60 W @ 4 Ohms, 2 x 90 W @ 2 Ohms, 1 x 180 W @ 4 Ohms
  • Designed to conform to the American Boat and Yacht Council (ABYC) marine electronic standards with gold-plated power, ground, speaker and RCA corrosion resistant connections
  • High-end features such as fully adjustable crossovers including High Pass, Low Pass, Full Pass, Bass EQ and built-in diagnostics with visual indicators
  • For multiple amplifier applications, the amps also feature Line Outputs so daisy-chaining additional amps without the need of Y-cable adapters can be easily done
  • UV and salt water resistant paint, silk screen and heat sink enclosure; Marine-grade conformal coated circuit boards resist corrosion from salt spray and moisture and non-corrosive brushed aluminum extrusion
2 x 60 W @ 4 Ohms, 2 x 90 W @ 2 Ohms, 1 x 180 W @ 4 Ohms. Founded in the early 60's in Obrigheim, Germany, MB Quart is known worldwide for designing and manufacturing innovative and technically advanced audio products. From car, marine and home loudspeakers, amplifiers and subwoofers, MB Quart products exemplify "German Engineering." The Nautic line of amplifiers use extreme speed processors resulting in overall low-distortion for stable reliable and excellent sound performance while conforming to marine electrical standards. MB Quart most recently revolutionized the mobile loudspeaker industry with WideSphere technology that emits extra-wide sound dispersion to listeners in order to enjoy the full range of music from almost any seating position in a vehicle. Audio and marine systems are put through stringent tests under the most extreme environmental conditions. Decades of refinement with meticulous attention to detail and tolerances in hand-built components have earned MB Quart a distinguished reputation for quality manufacturing, unmatched reliability and extraordinary performance. Praised by countless world-wide audio press awards and critical listeners around the world, MB Quart brings extraordinary engineering expertise, experience and design philosophy to a truly global Maxxsonics brand. Parent company, Maxxsonics USA, offers decades of combined experience and distinction with four brands MB QUART, Hifonics, Autotek and Crunch. We independently support and maintain these best-in-class brands to bring you some of the biggest, baddest and coolest products in the car, marine and home audio industry. Maxxsonics designers and engineers take great care and satisfaction in producing only the finest quality products to exceed your needs. Look for the stylized blue "M" on your product and packaging. It stands for quality, performance and power you can only get from Maxxsonics.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 27, 2011 15:24:04

Friday, August 26, 2011

Sound Storm Laboratories EDGE Series DG22400 2400 Watt 2-Channel MOSFET Power Amplifier with Remote Subwoofer Level Control

Sound Storm Laboratories EDGE Series DG22400 2400 Watt 2-Channel MOSFET Power Amplifier with Remote Subwoofer Level Control Reviews


Other Picture


Sound Storm Laboratories EDGE Series DG22400 2400 Watt 2-Channel MOSFET Power Amplifier with Remote Subwoofer Level Control Feature

  • Two OHM stable Class AB 2-Channel
  • Capable of Tri-Mode Operation
  • Remote Subwoofer level control
  • MOSFET PWM (Pulse With Modulated) power supply
  • Soft turn-on circuit
Looking for an EDGE? Our product development team - comprised of engineers, competitors, installers, and industry professionals - is always looking for ways to keep SSL on the leading EDGE of industry trends and technology. They work tirelessly to ensure that Sound Storm Laboratories lives up to its reputation as a provider of reliable, powerful amplifiers that accurately reproduce sound. That diligence and effort has brought us, new for 2011, the EDGE series of amplifiers. Sound Storm has the multi-channel EDGE amplifier to fit most any mobile entertainment application. The EDGE series of amplifiers provide a dizzying twelve models of four and two-channel amplifiers, all of which accurately reproduce and deliver a full range of frequency to SSL subwoofers and full-range speakers. The new EDGE series strengthens an already impressive array of Sound Storm Laboratories amplifiers solidifying SSL's place on top of the 12-volt marketplace, and further demonstrating that everything else is just noise.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 26, 2011 14:47:09

Thursday, August 25, 2011

MA Audio SS2400.2 Synergy 2400 Watt 2-Channel Amp Stereo Car Amplifier

MA Audio SS2400.2 Synergy 2400 Watt 2-Channel Amp Stereo Car Amplifier Reviews


Other Picture


MA Audio SS2400.2 Synergy 2400 Watt 2-Channel Amp Stereo Car Amplifier Feature

  • MA Audio SS2400.2 Synergy 2400 Watt 2-Channel Amp Stereo Car Amplifier
  • 1200 Watt RMS to 2400 Watts Peak Output Power (600W RMS x 2CH @ 2 Ohm / 300W RMS x 2CH @ 4 Ohm)
  • Free Remote Subwoofer Level Control with Variable 0-+12dB Bass Boost
  • RCA Line and Speaker Level Inputs/Variable Gain Control/High and Low Pass Crossovers
  • Full 1 Year Manufacturer's Warranty
This MA Audio SS2400.2, Synergy Series 2-channel car amplifier, retails for 9.99 plus tax. MA Audio Synergy Series amplifiers feature blue LED lighting, fine-tuned audio controls, extreme durability, and proprietary technologies that deliver stronger, more reliable performance than other amplifiers on the market today. This high performance MOSFET amplifier delivers 600 watts RMS to 1200 watts peak into each channel - more than enough to drive a pair of full-range speakers or components to their musical peaks. You can also bridge the amp to blast 2400 watts peak to a subwoofer(s) or with its Tri-mode capability, run subs and speakers simultaneously. Other features include: MOSFET power supply, power/protection LEDs, 0-12dB bass boost (FREE remote bass knob), selectable LP/FULL/HP crossovers, LP/HP filters, gain control, and RCA line and speaker line inputs. We are an authorized MA Audio dealer. Complete with a full 1 year warranty and our exclusive 30 day money back guarantee.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 25, 2011 12:01:04

Tuesday, August 23, 2011

Clarion APX2121 2/1 Channel 200 Watts Maximum Amplifier

Clarion APX2121 2/1 Channel 200 Watts Maximum Amplifier Reviews


Other Picture


200 Watts of Maximum Music Power 80W x 2 into 2 Ohms, @ <0.1% THD 60W x 2 into 4 Ohms, @ <0.1% THD Selectable Bass Boost; 0/6/12dB @ 50Hz Adjustable -12db/Oct. High/Low Pass Crossover, 50-300Hz Gold Plated Connectors; RCA/ Speaker/ Power Speaker Level Input Dimensions 7-1/8" x 11" x 2-1/4"


Visit Store Now !!

Detail Products

Detail Reviews




Aug 24, 2011 07:36:04

Monday, August 22, 2011

Powerbass ASA-800.2x 2-Channel Power Amplifier - 1600 watts

Powerbass ASA-800.2x 2-Channel Power Amplifier - 1600 watts Reviews


Other Picture


Powerbass ASA-800.2x 2-Channel Power Amplifier - 1600 watts Feature

  • Power Output - 400 watts x 2 2-ohm continuous power - 200 watts x 2 4-ohm continuous power - 800 wats x 1 4-ohm continuous power
  • Bridged Output - 1600 watts x 1 max 4-ohm
  • Built in 12dB electronic crossover - 40Hz-250Hz Selectable High or Low Pass
  • Fully adjustable Bass EQ - 18dB Centered at 40Hz
  • Self Diagnostic Multi Protection Circuit with LED Status Indicator
The PowerBass ASA Series of amplifiers offers a complete line up of 2 and 4 channel models. Whether you just need more power or you are looking to build an entire system the ASA Series has a model that is perfect for almost any application. The low profile (under 2-Inch) extruded heatsink lends itself to a wide variety of mounting locations in the vehicle—including under most front seats. Although the elegant brushed satin black finish and rounded corners will have you wanting to show off this sophisticated piece of electronics to all your friends! All of our 2 and 4-channel models include such features as built in electronic crossovers (high or low pass), gain control, variable Bass EQ control, pass through low level RCA jacks and solder-less input terminal blocks. Thanks to our over engineered MOSFET power supplies each model can comfortably operate at 2-ohm stereo or 4-ohm mono. Plus each model comes equipped with a port to add an optional wired remote Gain Controller (order model ASA-BASS) that allows the driver to adjust the woofers output from the cockpit of the vehicle.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 22, 2011 15:38:05

Sunday, August 21, 2011

Dual XPA2500 300 Watt Amplifier

Dual XPA2500 300 Watt Amplifier Reviews


Other Picture


Dual XPA2500 300 Watt Amplifier Feature

  • 50 Watts RMS x 2 channels @ 4 ohms
  • Signal to noise ratio 72dBA
  • Variable high pass corssover and variable low pass crossover
  • Selectable crossover high pass low pass full range
  • Variable bass boost
Dual's XPA2500 300 Watt Amplifier features PWM MOSFET power supply, 2 ohm stable stereo operation, class AB output design, stereo/bridged simultaneous operation, bridgeable operation for subwoofer applications, extruded aluminum heatsink, barrier strip connection terminals. side mounted controls, auto-reset thermal overload protection, speaker short circuit protection, reverse polarity protection and bi-color LED status indicator.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 21, 2011 20:19:49

Saturday, August 20, 2011

MBQUART FX2.60 2 Channel Amplifier

MBQUART FX2.60 2 Channel Amplifier Reviews


Other Picture


MBQUART FX2.60 2 Channel Amplifier Feature

  • 2 Channel Amplifier
  • 2x 60 Watts into 4 Ohms
  • Bridgeable 2 or 1 Channel
2 x 60 @ 4 OHMS, 2 x 120 @ 2 OHMS, 1 x 240 @ 4 OHMS


Visit Store Now !!

Detail Products

Detail Reviews




Aug 21, 2011 00:02:08

Thursday, August 18, 2011

Boss Audio R6002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control

Boss Audio R6002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control Reviews


Other Picture


Boss Audio R6002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control Feature

  • 600 Watt
  • 2-Channel
  • Remote Subwoofer Level Control
2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control, 1200 Watts, 10 7/16 Inch Width x 2 1/4 Inch Height x 12 9/32 Inch Length, Features Blue Illuminated Boss Logo


Visit Store Now !!

Detail Products

Detail Reviews




Aug 18, 2011 19:07:04

Wednesday, August 17, 2011

MTX TE1004 Thunder Elite Amplifier 125 W x 4

MTX TE1004 Thunder Elite Amplifier 125 W x 4 Reviews


Other Picture


MTX TE1004 Thunder Elite Amplifier 125 W x 4 Feature

  • MTX Thunder Elite amplifiers are the most technologically advanced amplifiers that MTX offers. The looks and design of the amplifer puts the Thunder Elite series at the top of the amplifier line.
  • Thunder Elite amplifiers offer the most extensive array of sound enhancement features of any Thunder amplifier.
  • Thunder Elite Series 4-Channel Class AB Car Amplifier. RMS Power Rating: 4 ohms: 125 watts x 4 chan.2 ohms: 225 watts x 4 chan. Bridged, 4 ohms: 450 watts x 2 chan. Max power output: 1900 watts (475 watts x 4 chan.)
  • Overload and thermal protection. Prizm EFX With Demo Mode. Self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand.
  • Thunder Elite Series 4-Channel Class AB Car Amplifier
  • LED power and protection indicators
  • Max power output: 1900 watts (475 watts x 4 chan)
  • RMS Power Rating: 4 ohms: 125 watts x 4 chan, 2 ohms: 225 watts x 4 chan, Bridged, 4 ohms: 450 watts x 2 chan
  • Semi Unregulated MOSFET
1900W Max, 4-Channel Thunder Elite Amplifier


Visit Store Now !!

Detail Products

Detail Reviews




Aug 17, 2011 20:03:16

Monday, August 15, 2011

Lanzar MXA282 Max Pro 4000-Watt 2-Channel High-Power Mosfet Amplifier

Lanzar MXA282 Max Pro 4000-Watt 2-Channel High-Power Mosfet Amplifier Reviews


Other Picture


Lanzar MXA282 Max Pro 4000-Watt 2-Channel High-Power Mosfet Amplifier Feature

  • MOSFET amplifier with 2000 Watts peak power (4000 Watts bridged), 2 x 300 Watts RMS @ 4 ohms, 2 x 450 Watts RMS @ 2 ohms, and 900 watts RMS @ 4 ohms bridged.
  • 18dB bass boost circuit with included bass boost remote control
  • Electric crossover network with High- and Low-pass filters
  • Advanced protection circuitry with LED indicators
  • Variable phase shift control
Get some monstrous sounds with this MXA282 1000W amp. A DC to DC switching power supply provides headroom for even the most demanding peaks and dynamic ranges found on modern recordings. With an HP/LP crossover, advanced protection circuitry, high and low level inputs, a variable phase shift control, and more, the MXA282 is ready for most applications.

You want overhead? You got it. Click to enlarge.

Blue illuminated controls dial it in and look sharp doing it.

Includes remote bass boost control.

Two Channel or Bridged Mode
Run in two-channel mode for 2000 Watts peak power (1000 Watts RMS) or bridge to your sub for a whopping 4000 Watts peak (1650 RMS).

Input Level Controls
Enables the matching of input levels to the output levels from head unit (or other signal source).

Three Crossover Modes With Illuminated Controls
The MXA282 features an electric crossover network with three modes: low pass (permits only low frequency signals to pass to speakers), high pass (permits only high frequency signals to pass to speakers), or flat.

Bass Boost Circuit
Get a little something extra with the MXA282's bass boost feature. With the switch engaged, the bass level is increased approximately 18dB.

Bass Boost Remote Control
Plug in the remote bass boost control and get instant access to the boost anytime.

Power Protection LED Indicators
Provide instant information on status of amplifier, including short-circuit and thermal overload alerts.

Variable Phase Shift Control
Allows you to change the phase of your high and low crossover from 0 to 180 degrees to help compensate for the timing difference between drivers.

What's in the Box
Lanzar MXA282 Amplifier, Bass Boost Remote Control, User's Manual, Warranty Card 2 x 1000 Watts RMS at 4 Ohms 2 x 2000 Watts Max at 4 Ohms 1 x 4000 Watts Max at 4 Ohms idged 2 x 1650 Watts at 2 Ohms RMS Electronic Crossover Network Bass Boost Circuit Variable Phase Shift Control 2 Ohms Stereo Stable Anti-Thump Turn-On Soft Turn On/Off High Low Level Inputs Blue Light Illuminated Crossover Control Power Protection LED Indicators Advanced Protection Circuitry Bass Boost Remote Control T.H.D: <0.04% S/N Ratio: >90dB Channel Separation:65dB Frequency Response:15Hz- 35kHz Dimensions: 10.47-InchW x 2.46-InchH x 21-InchL


Visit Store Now !!

Detail Products

Detail Reviews




Aug 15, 2011 18:30:19

Sunday, August 14, 2011

Legacy LA1868 2 Channel 2000 Watt Bridgeable Mosfet Amplifier

Legacy LA1868 2 Channel 2000 Watt Bridgeable Mosfet Amplifier Reviews


Other Picture


Legacy LA1868 2 Channel 2000 Watt Bridgeable Mosfet Amplifier Feature

  • 1000 Watts x 2 Output
  • 2000 Watts x 1 Bridged Output
  • Variable Hi/Lo Electronic Crossover Network
  • Variable Bass Boost
  • Variable Input Level (Gain) Control
1000 Watts x 2 Output2000 Watts x 1 idged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost Variable Input Level (Gain) Control MOSFET PWM Power Supply Power ON LED Indicator LED Protection Indicator Remote Bass Boost Hi/Lo Impedance Input Thermal / Overload / Short Circuit Protection Anti-Thump Turn-On Dimensions: 1.97-Inch H x 11.42-Inch W x 17-Inch L


Visit Store Now !!

Detail Products

Detail Reviews




Aug 14, 2011 15:20:04

Friday, August 12, 2011

Vibe 1600 Watt 2 Channel Mosfet Amplifier

Vibe 1600 Watt 2 Channel Mosfet Amplifier Reviews


Other Picture


Vibe 1600 Watt 2 Channel Mosfet Amplifier Feature

  • 2 x 400 Watts RMS at 4 Ohms
  • 2 x 800 Watts Max at 4 Ohms
  • 1 x 1600 Watts Max at 4 Ohms Bridged
  • 2 x 650 Watts at 2 Ohms RMS
  • MOSFET Automatically Switches to Maintain Rated Power Over a Wide Range of Battery Voltages
2 x 400 Watts RMS @ 4 Ohms 2 x 800 Watts Max @ 4 Ohms 1 x 1600 Watts Max @ 4 Ohms idged 2 x 650 Watts @ 2 Ohms RMS MOSFET Automatically Switches to Maintain Rated Power Over a Wide Range of Battery Voltages Stiffly Regulated PWM-Type Power Supplies Variable Input Level Controls for Each Pair of Cannels Variable High Low Pass Crossover Controls High-Efficiency, Heavy Aluminum Heatsink Remote Subwoofer Bass Control Electronic Crossover Network Bass Boost Circuit idgeable at 4 Ohms 2 Ohm Stereo Stable Gold RCA Inputs Line Outs for Left Right Channels Power Protection LED Indicators Advanced Protection Circuitry Soft Turn On/Off Frequency Response: 15 Hz-35 kHz S/N Ratio: 90 dB Fuse: 25A x 2 Dimensions: 10.25-InchW x 2-InchH x 19-InchL


Visit Store Now !!

Detail Products

Detail Reviews




Aug 13, 2011 08:05:04

Wednesday, August 10, 2011

MTX 702X 2-Channel Amplifier

MTX 702X 2-Channel Amplifier Reviews


Other Picture


MTX 702X 2-Channel Amplifier Feature

  • Two channel amp
  • 70 Watts RMS x 2 Channels at 4 Ohms
  • 105 Watts RMS x 2 Channels at 2 Ohms
  • 11-3/16"W x 2-1/4"H x 9-5/8"D
  • (40-5,000 Hz at 24 dB per octave)
The MTX X Thunder series of amplifiers delivers exceptional sound quality at truly affordable prices.Heavy-duty aluminum construction with large heat sinks and easily accessible connections and controls make X Thunder amplifiers not only visually appealing but also user friendly. Reasonable prices and high power ratings make the X Thunder even more attractive. X Thunder amps are the ideal complement for the speakers and subwoofers in the X Thunder lineup.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 10, 2011 23:36:08